Refactor the clients

modules/servermodules/wireguard/wireguard-server.nix

@@ -1,15 +1,22 @@
+let
+  allowedIPs = [ "10.100.0.1/24" ];
+  port = 51820;
+  publicIp = "37.27.207.39";
+in
 {
+  serverModule =
+    {
       pkgs,
       config,
       ...
-}:
-{
+    }:
+    {
       # enable NAT
       networking.nat.enable = true;
       networking.nat.externalInterface = "eth0";
       networking.nat.internalInterfaces = [ "wg0" ];
       networking.firewall = {
-    allowedUDPPorts = [ 51820 ];
+        allowedUDPPorts = [ port ];
       };
 
       age.secrets.wg-selene = {
@@ -20,10 +27,10 @@
         # "wg0" is the network interface name. You can name the interface arbitrarily.
         wg0 = {
           # Determines the IP address and subnet of the server's end of the tunnel interface.
-      ips = [ "10.100.0.1/24" ];
+          ips = allowedIPs;
 
           # The port that WireGuard listens to. Must be accessible by the client.
-      listenPort = 51820;
+          listenPort = port;
 
           # This allows the wireguard server to route your traffic to the internet and hence be like a VPN
           # For this to work you have to set the dnsserver IP of your router (or dnsserver of choice) in your clients
@@ -46,13 +53,16 @@
 
           peers = [
             # List of allowed peers.
-        { # Feel free to give a meaningful name
-          # Public key of the peer (not a file path).
-          publicKey = (builtins.readFile ../../../keys/wg-macbook.pub);
-          # List of IPs assigned to this peer within the tunnel subnet. Used to configure routing.
-          allowedIPs = [ "10.100.0.2/32" ];
-        }
+            (import ../../systems/macbook/wireguard.nix).peerConfig
           ];
         };
       };
+    };
+
+  infoForClients = {
+    endpoint = "${publicIp}:${builtins.toString port}";
+    allowedIPs = allowedIPs;
+    publicKey = builtins.readFile ../../../keys/wg-selene.pub;
+    persistentKeepalive = 25;
+  };
 }

systems/macbook/macbook.nix

@@ -12,7 +12,7 @@ nix-darwin.lib.darwinSystem {
     (import ../../modules/usermodules/darwinsettings.nix self)
     home-manager.darwinModules.home-manager
     ./users.nix
-    ./wireguard.nix
+    (import ./wireguard.nix).systemModule
   ];
 
   specialArgs = {

systems/macbook/wireguard.nix

@@ -1,12 +1,16 @@
-{ config, ... }:
+let 
+  ip = "10.100.0.2/32";
+  publicKey = (builtins.readFile ../../keys/wg-macbook.pub);
+in
 {
+  systemModule = { config, ... }: {
     age.secrets.wg-private.file = ../../keys/wg-macbook;
     networking.wg-quick.interfaces.wg-selene = {
       privateKeyFile = config.age.secrets.wg-private.path;
 
       # The internal IP address assigned to this client by the server.
       # The /24 subnet mask is important for knowing the VPN's local network.
-    address = [ "10.100.0.2/32" ];
+      address = [ ip ];
 
       # DNS server(s) to use when the tunnel is active.
       # This is critical for resolving hostnames when all traffic is routed.
@@ -16,22 +20,13 @@
       ]; # Cloudflare DNS, or use your preferred one like 8.8.8.8
 
       peers = [
-      {
-        # Public key of the SERVER.
-        publicKey = builtins.readFile ../../keys/wg-selene.pub;
-
-        # The server's public IP address and listening port.
-        endpoint = "37.27.207.39:51820";
-
-        # This is the most important part for a "VPN" setup.
-        # 0.0.0.0/0 tells your Mac to route all IPv4 traffic through the tunnel.
-        # Add "::/0" if your server and network support IPv6.
-        allowedIPs = [ "10.100.0.1/24" ];
-
-        # Optional but highly recommended for clients behind NAT.
-        # It sends a packet every 25 seconds to keep the connection open.
-        persistentKeepalive = 25;
-      }
+        (import ../../modules/servermodules/wireguard/wireguard-server.nix).infoForClients
       ];
     };
+  };
+
+  peerConfig = {
+    publicKey = publicKey;
+    allowedIPs = [ip];
+  };
 }

systems/selene/system.nix

@@ -17,7 +17,7 @@ nixpkgs.lib.nixosSystem {
     (import ../../modules/servermodules/nginx.nix "maxiemgeldhof.com")
     ../../modules/servermodules/grafana/grafana.nix
     ../../modules/servermodules/jellyfin/jellyfin.nix
-    ../../modules/servermodules/wireguard/wireguard-server.nix
+    (import ../../modules/servermodules/wireguard/wireguard-server.nix).serverModule
     ./volumes.nix
     agenix.nixosModules.default
   ];